|
|
| Industrial 350 Amp.
Compact MIG/MAG Welding Machine |
|
|
 Properties
For welding :
- Light and medium steel sections continously.
- Stainless steel up to 6 mm.
- Aluminum up to 4 mm.
Welding voltage adjustment through 21 steps.
Fan-cooled and thermally protected against
overloading.
Built-in wire feeding system incorporated with
spot and inremittent timers.
Burn-back and post-gas flow timers are pre-set
for optimum performance.
220 VAC auxilliary power receptacle.
Internal components are protected against the
effects of moisture and heavy dust.
Factory installed running gear/cylinder rack
for better mobility in the work shop.
| |
|
| Files : |
|
|
| Applications : |
|
Besides that this machine
is a very good selection for medium thickness steel
welding, it is also a very good choice for stainless
steel and aluminum MIG welding. |
|
| Line Voltage (3 phase) |
380 V / 50 Hz |
| Input
Power (60%) |
16.5 KVA |
| Input
Current (60%) |
25 A |
| Recommended Line fuses |
3 x 32 A |
| Rated
Welding Current (60%) |
350 ADC |
| Welding
Current Range |
35 - 370 ADC |
| Open
Circuit Voltage |
17 - 44 VDC |
| Voltage
Adjustment Steps (Course x Fine) |
3 x 7 |
| - |
|
| Dimensions ( l x w x h ) |
875 x 405 x 800 mm |
| Weight
|
140 kg |
| Protection Class |
IP 21 |
|
|
| Wire Feeding Roll Size |
V groove 1.0 / 1.2 mm |
| Wire
Feeding Speed |
1 - 20 m/min |
| Trigger
Control |
2 / 4 |
| Spot
Welding Timer |
0.5 - 2.0 sec |
| Intermittent Welding Timer |
0.5 - 2.0 sec |
| Manual
Feeding (Inching) Button |
6 m/min |
|
|
| Welding Current (60%, with CO2) |
400 ADC |
| Welding
Current (60%, with MIX GAS) |
300 ADC |
| Cooling
Type |
Air |
| Voltage
Class |
L |
| Legth
|
3 mt |
| Weight
|
1.5 kg |
| Std.
Accessories : |
|
| Liner
|
1.0 / 1.2 mm |
| Contact
Tip |
1.0 mm |
| Nozzle
|
14 mm |
|
|
| Work
Cable and Clamp (35 mm2-3mt) |
|
1
|
| Regulator/Flowmeter |
|
1
|
| Heater
for CO2 |
|
1
|
| Plastic
Adaptor for Wire Baskets |
|
1
|
| Nozzle
Cleaning Tool |
|
1
|
| SPARES
: |
|
|
| Nozzle
16 mm |
|
1
|
| Contact
Tip 1.2 |
|
5
|
| Contact
Tip 1.0 |
|
5
|
| Gas
Diffuser (MTA350) |
|
1
|
| - |
|
|
| Fuse
(0.8A, 1A, 2A, 6A) |
|
1 set
|
|
|
| Wire
Feeding Roll for Steel 0.6-0.8 |
|
|
| Wire
Feeding Roll for Steel 1.0-1.2 |
|
|
| Wire
Feeding Roll for Aluminum 0.8-1.0 |
|
|
| Wire
Feeding Roll for Aluminum 1.0-1.2 |
|
|
| Liner
for Steel 0.6-0.8 |
|
|
| Liner
for Aluminum 0.8-1.0 |
|
|
| Liner
for Aluminum 1.0-1.2 |
|
|
| Contact
Tube 0.6 |
|
|
| Contact
Tube 0.8 |
|
|
| Contact
Tube 1.6 |
|
|
| Nozzle
14 |
|
|
| Nozzle
18 |
|
|
|
|
|
