|
|
|
|
 Properties
For welding :
- Mild steels up to 10 mm
- Stainless steels up to 6 mm
- Aluminum up to 6 mm
Welding voltage adjustment through 21 steps
-
Analog Voltmeter / Ammeter
Fan-cooled and thermally protected against
overloading.
Separate 4 WD wire feeder up to 15 mt. harness
length.
Burn-back and post-gas flow timers are pre-set
for optimum performance.
220 VAC auxilliary power receptacle.
Internal components are protected against the
effects of moisture and heavy dust
Factory instaled running gear / cylinder rack
for better mobility in the work shop.
| |
|
| Files : |
|
|
| Applications : |
|
This 350 Amp at 60% duty
cycle macine has a robust 4 WD separate Wire Feeder. The
harness could be selected from 2m up to 15 m. If needed
the modular structure allows to add a water cooling unit
on top of the machine. This macine is one of the most
sold type, since 350 Amp is sufficient for most of the
MIG/MAG applications. |
|
| Line Voltage ( 3 Phase ) |
380 V / 50 Hz |
| Input
Power (60%) |
16.5 KVA |
| Input
Current (60%) |
25 A |
| Recommended Line Fuses |
3 x 32 A |
| - |
|
| Rated
Welding Current (60%) |
350 ADC |
| Welding
Current Range |
45 - 400 ADC |
| Open
Circuit Range |
17 - 44 VDC |
| Voltage
Adjustment Steps (Course x Fine) |
3 x 7 |
| Dimensions ( l x w x h ) |
1030 x 440 x 740 mm |
| Weight
|
118 kg |
| Protection Class |
IP 21 |
|
|
| Wire Feeding Roll Size |
1.0 / 1.2 mm |
| Wire
Feeding Speed |
20 mt/sec |
| Trigger
Control |
2/4 |
| - |
|
| Dimensions ( l x w x h ) |
560 x 210 x 380 mm |
| Weight
(without wire & harness) |
26 kg |
| Harness
Length |
5 mt |
|
|
| Welding Current (60%, with CO2) |
400 ADC |
| Welding
Current (60%,with MIX GAS) |
300 ADC |
| Cooling
Type |
Air |
| Length
|
3 m |
| Weight
|
1.5 kg |
| Voltage
Class |
L |
| Std.
Accessories : |
|
| Liner
|
1.0 / 1.2 |
| Contact
Tip |
1.0 |
| Nozzle
|
16 |
|
|
| Work
Cable and Clamp (35mm2-3mt) |
|
1
|
| Regulator / Flowmeter |
|
1
|
| Heater
for CO2 |
|
1
|
| Plastic
Adaptor for Wire Baskets |
|
1
|
| Nozzle
Cleaning Tool |
|
1
|
| SPARES
: |
|
|
| Nozzle
16 mm |
|
1
|
| Contact
Tip (1.2) |
|
5
|
| Contact
Tip (1.0) |
|
5
|
| Gas
Diffuser |
|
1
|
| - |
|
|
| Fuse
(0.8A, 1A, 2A, 6A) |
|
1 set
|
|
|
| Wire
Feeding Roll for Steel (0.8-1.0) |
|
|
| Wire
Feeding Roll for Steel (1.0-1.2) |
|
|
| - |
|
|
| Wire
Feeding Roll for Al (0.8-1.0) |
|
|
| Wire
Feeding Roll for Al (1.0-1.2) |
|
|
| Liner
for Steel (0.8-1.0) |
|
|
| Liner
for Steel (1.0-1.2) |
|
|
| Liner
for Aluminum (0.8-1.0) |
|
|
| Liner
for Aluminum (1.0-1.2) |
|
|
| Contact
Tip 0.8 (steel/alu) |
|
|
| Contact
Tip 1.0 (steel/alu) |
|
|
| Contact
Tip 1.2 (steel/alu) |
|
|
| Nozzle
14 mm |
|
|
| Nozzle
18 mm |
|
|
|
|
|
| DT 40
(Turn Table for Wire Feeder) |
|
| TS 43-2
(Wire Feeder with 2 mt Harness) |
|
| TS 43-5
(Wire Feeder with 5 mt Harness) |
|
| TS
45-10 (Wire Feeder with 10 mt Harness) |
|
| - |
|
| MTA
350-4 |
|
|
|
|
