|
|
|
|
Covered electrode for Welding Stainless and Heat
Resisting Steels
|
| Basic Covering |
|
|
|
| Standards: |
EN 1600 |
E Z 13 1 B
42 |
|
DIN 8556
|
E 13 1 MPB
20+ |
|
AWS/ASME
SFA-5.4 |
E 410 - 15
|
|
TS 2716
|
E 13 1 BS 20
|
|
TS 2716 EN
1600 |
E Z 13 1 B
42 | |
|
| Application and Properties: |
|
Basic type stainless
steel electrode with high recovery, for welding of
stainless and heat resistant chromium steels or cast
steels having chromium of approx. 13%. Deposits
martensitic stainless steel weld metal. Also suitable
for corrosion and abrasion resistant surfacing welds
(contact surfaces of gas, water and steam fittings)
subjected to operating temperatures up to 450°C. Weld
metal is non-scaling up to 850°C. Use with DCEP.
Depending on type of base metal and wall thickness,
preheating and interpass temperatures from 100 to 400°C
and tempering at 650 to 750°C are advisable. |
|
| Materials: |
| 1.4000 |
X 6 Cr 13 |
X 6 Cr 13 |
403, 410S, 429 |
| 1.4002 |
X 6 Cr Al 13 |
X 6 Cr Al 13 |
405 |
| 1.4006 |
X 12 Cr 13 |
X 12 Cr 13 |
410 |
| 1.4006 |
X 10 Cr 13 |
X 10 Cr 13 |
410 |
| 1.4006 |
G-X 12 Cr 13 |
G-X 12 Cr 13 |
CA-15 |
| 1.4008 |
- |
G-X 8 Cr Ni 13 |
- |
| 1.4021 |
X 20 Cr 13 |
X 20 Cr 13 |
420 |
| 1.4024 |
X 15 Cr 13 |
X 15 Cr 13 |
- |
| 1.4027 |
- |
G-X 20 Cr 14 |
- |
| - |
- |
- |
414 |
|
| Please observe
admissible operating temperatures for welding consumable
and base metal |
|
| Qualification Tests |
: TSE
| |
|
| All-Weld Metal Analysis (typical
values in %) : |
|
|
|
| Mechanical Properties of
All-Weld Metal (single values are typical values): |
|
|
| AW : As welded |
|
| Redrying: For
2 hrs. at 300° C. |
|
| Welding Current [A]: |
|
|
|
| Packing & Order Information
: |
| 1093610 |
2.50 |
350 |
190 |
4.24 |
4 |
16.95 |
| 1093616 |
3.25 |
350 |
100 |
3.35 |
4 |
13.40 |
| 1093620 |
4.00 |
350 |
100 |
5.19 |
4 |
20.76 |
|
|
| Type of Current/Polarity/Welding Positions
: |
| You can click on
the figure to see its explanation... |
|
|
|
