|
|
| Product Name |
|
| SİSTA Sista Aquarium Silicone |
| Description |
| Description
Single component, acetate curing sealant.
Application Fields
Sista Aquarium Silicone is suitable for all kinds of aquarium manufacturing.
Special Features
-Excellent adhesion.
-Highly elastic.
-High load capacity.
-UV resistant.
-Solvent free.
-Harmless for fishes
Technical Data
Density : 1.02 g/ml
Application temperature : between +4 and +40°C
Skin formation : 10 min at room temperature.
Curing time : 2 days for every 5 mm.
Shore A Hardness : 20
E 100 Module : 5 N/cm2
Temperature resistance : between -55 and +200°C
Permanent elasticity : 25%
Maximum joint width : 30 mm
Heat conductivity : 0.17 W/Km (DIN 53612)
Consumption
Dimension : Consumption for 1 m : Length obtained by 1 cartridge (310 ml) :
5x 5 mm 25 ml 12.5 m
10x10 mm 100 ml 3.1 m
15x10 mm 150 ml 2.1 m
25x12 mm 300 ml 1 m
Application
Mask joint edges with adhesive tape. Cut open cartridge; screw on nozzle and cut of tip at desired angle. Insert cartridge in gun and apply Sista Aquarium Silicone bubble-free continuously into the joint. Fill the joint completely. Smooth Sista Aquarium Silicone with soapy water immediately after application. Remove adhesive tape and smooth again.
Cleaning The Equipment
Use alcohol to remove excess uncured.
Dimensions And Colour
Cartons containing 20 cartridges of 310 ml each.
Storage
12 months if stored in a cool, dry warehouse (max. 20°C).
Important Notes
No warning sign necessary.
Other Information
Colour :
Transparent.
Pretreatment of joints :
Joints must be clean, dry, free of grease and dust. |
|
